PAS Sensor T281
PAS Sensor T281
- Domyślny opis krótki
PAS Sensor T281
ZASTOSOWANIE
Crank Rotation Sensor (PAS)
Connector standard: 3-pin Higo/Julet KT standard
Magnet disc mounting side: Right (on the crankset)
Wire length: approx. 10 cm
MONTAŻ
Sensor mounting: Under the bottom bracket (attach using the screw provided in the kit, if there is no mounting hole, glue it to the bottom bracket using, for example, two-component adhesive, silicone, mounting glue, etc.)
Mounting the magnet disc: on the smallest chainring. There are 2 options: either the disc with magnets will attach itself to the steel sprocket, or it should be glued to it using an appropriate adhesive (e.g., two-component adhesive, silicone, mounting glue, etc.)
Cable length
1m
Mounting location
right side of the bottom bracket
Sensor installation
to the frame with bands
Crank mount
Kwadrat T281
Waterproof Connector
Yes
24 months for consumers, 12 months for companies
The store guarantees repair or replacement of equipment for up to 24 months for consumers and 12 months for companies from the date of purchase. Complete the complaint form available on the store's website.
What is not covered by the warranty?
- Errors in installation or maintenance
- Thermal damage (overheating)
- Modification/interference in the device casing
- Modifications/changes inside the device
- Mechanical damage caused by incorrect use of the product. e.g. damage from falls, excessive mechanical loads
Write your opinion
Guide
