Two-piece removeable PAS sensor 12M square

Two-piece removeable square PAS sensor 12M

Enables activation of the pedal assist system.
The kit sold is a special version with simple assembly - it does not require disassembly of the crank and bottom bracket, assembly takes place without the use of specialized bicycle mechanics tools.

Mounting the sensor: to the frame with bands

Number of magnets : 12
Cable length: 1m

Pinout description  1: Red [5V], Blue [signal]. Yellow [GND],
Pinout description  2: Red [5V], Blue [signal], Black [GND]
Pinout description  3: Brown [5V], Yellow [signal], Black [GND]
Pinout description  4: Red [5V], White [signal], Black [GND]

PAS sensor for mounting on the "square" axis of the bottom bracket.

ATTENTION:

ALWAYS check that the wires in the machine plug and the wires of the controller are compatible. The fact that the controller and the controller have the same plugs that match NOTHING MATTER, because different manufacturers have different production standards. You should always additionally check whether the wires in these connectors are compatible, i.e. after connecting them to each other, power, ground or signals will be connected correctly and in accordance with both connectors. If you disconnect the plugs but do not check if the wires coming out of them are in the correct order, you risk damaging the controller or the connected machine. The tip is especially relevant when you buy 1 element in our store and want to connect it to a second device in your home. We strongly encourage you not to use connectors and solder your installation permanently directly to each other with wires. This protects against incorrect fastening of incompatible connectors.