Thumb throttle lever with ignition switch and 10-100V voltmeter

Thumb throttle lever with ignition switch and 10-100V voltmeter

Shifter (universal):

Ignition switch and voltmeter:

Comments:

If your bike has a controller with a display and its own switch (e.g. controller + KT display with a panel with buttons) then DO NOT USE this throttle. Buy a simple throttle WITHOUT ignition switch and WITHOUT voltmeter. First of all, you already have a voltmeter on the display and you don't need a second one. Secondly, the shift key switch is not intended for controllers with their own switch and cannot be used simultaneously with the switch on the display.

ALWAYS check that the wires in the appliance plug and the wires in the controller connector match. The fact that the controller and the device have the same plugs that fit together DOES NOT MEAN ANYTHING because different manufacturers have their own different production standards. It should always be additionally checked whether the wires in these connectors are compatible, i.e. after connecting them together, the power supply, ground or signals will be connected correctly and in accordance in both connectors. If you connect the plugs but do not check whether the wires coming out of them are in accordance with the order, you risk damaging the controller or the attached device. The tip especially applies to the situation when you buy 1 element in our store and want to connect it to the second device you have at home. We strongly encourage you not to use the connectors and solder your installation permanently directly to each other with wires. This prevents incompatible connectors from being spliced together incorrectly.