Save to shopping list
Create a new shopping list
Controller Sabvoton ML60 48V 55A (vector)

Controller Sabvoton ML60 48V 55A (vector)

  • Power supply: 48V Current: 55A (phase 170A)
  • Dimensions: 220x110x50mm
  • Weight: 1250 g
  • Voltage: 48 (13s)
  • Maximum power: 5kW (for 72V)
  • Input voltage ranges: For 48V (13s LiIon): minimum 40V, maximum 55V
81,85 €
/ pc incl. VAT
Express checkout 1-Click(without registration)
14 days for easy returns
Safe shopping
Free delivery to parcel machinesMore information
Smile - deliveries from online stores when ordered from €10.77 are for free.

You buy and delivery is free!

deliveries from online stores are free when you order €10.77 are for free.
Free delivery includes parcel delivery to a parcel machine

Controller Sabvoton ML60 48V 55A (vector)


A modern vector controller predisposed to work in high-power structures. Recommended for use with motors rated at 3000W or more (preferably Mxus 3K Turbo)
This is a new version, the manufacturer lowered the DC current to 55A, but in return increased the inter-phase current up to 170A (compared to 140A previously), which results in a higher torque at speeds 0-50% of maximum

Power supply: 48V
Current: 55A (phase 170A)
Dimensions: 220x110x50mm
Weight: 1250 g
Voltage: 48 (13s)
Maximum power: 5kW (for 72V)

The individual controller models DO NOT WORK outside of their voltage operating ranges

CAUTION:

ALWAYS check that the wires in the machine plug and the wires of the controller coupler are compatible. The fact that the controller and the device have the same plugs that match NOTHING MATTER, because different manufacturers have different production standards. You should always additionally check whether the wires in these connectors are compatible, i.e. after connecting them to each other, power, ground or signals will be connected correctly and in accordance with both connectors. If you disconnect the plugs but do not check if the wires coming out of them are in the correct order, you risk damaging the driver or the connected device. The tip applies especially to a situation when you buy 1 element in our store and want to connect it to a second device in your home. We strongly encourage you not to use connectors and solder your installation permanently directly to each other with wires. This protects against incorrect fastening of incompatible connectors.

 

Description of the cables in the Sabvoton ML60 controller (vector, 55A):

1. Black [GND], Red [+ 5V], Green [Hall], Blue [Hall], Yellow [Hall] - connector for Hall sensors from the engine.

2. Red [+ 5V], black [GND], Green [signal] - throttle accelerating the throttle

3. Gray [High speed], Black [GND], Blue [Low speed] OR BI-Blue [High speed], Black [GND], Yellow and white [Low speed] - Speed ​​limit settings. Shorting the signal wires to GND sets the given limit. No wires connected sets the average speed

4. Blue-White [signal] - Reverse activated by GND signal

5. Yellow-Green [signal] - 5V square wave signal from Hall sensor for speedometers

6. Pink [Signal] - The input of the cruise control signal is activated by a momentary short circuit with GND, to exit the cruise control, move the throttle or use the signal from the brake

7. Violet [signal] - Service cable, not used

8. Brown-White [signal], Black [GND] - Activation of engine braking (regenerative). If these wires are short-circuited and the controller receives a brake signal from the brake handle, in addition to disconnecting the engine or turning off the cruise control, an attempt will be made to activate regenerative braking. Whether the controller will start it also depends on the state of charge of the battery or the speed at which we are moving.

9. Yellow-Black [signal] - GND speed limit signal 25 km / h

10. Red (combined with Orange) - Ignition switch. Entering + BAT starts the driver

11. Orange [ignition switch], Green [signal], Brown [engine phase] - Connector for alarm and wheel lock. Applying GND to the green signal wire activates the wheel parking braking. This makes it impossible to move away on the vehicle. Remember that the lock requires the controller to be turned on on the ignition, so you have to set + BAT to orange at the same time or do not turn off the controller from the main ignition.

12. Gray-White [signal] - Analog speedometer signal, the higher the speed, the higher the voltage on this wire in the range of 0V to + BAT

13. Blue-Blue [signal] - The "soft start" activation signal allows the motor to start smoothly and smoothly. A useful function when the engine is running in a MID system or other mechanical gear system. It allows you to extend the time of failure-free operation of all chain, toothed or belt ratios.

14. Black and white [signal] - The signal from the brake handle, controlled by GND

15. White [signal] - The signal from the brake handle, controlled + 12V

 

Ustawienie Fazy i Halle ML45/ML60 + Mxus 30H/3K turbo
Fazy silnik -> sterownik:
Żółty Żółty
Niebieski Zielony
Zielony Niebieski
Halle silnik -> Sterownik:
Żółty Żółty
Niebieski Zielony
Zielony Niebieski

 


The controller does not work with the engines: NineContinent 280x cassette version

NOTE: The controller is not programmable from the computer. After connecting the phases and the hall in the order appropriate for the engine, it is immediately ready for operation.

 

24-month warranty.

Does not include in the case of:

- Errors in assembly or maintenance

- Thermal damage (overheating)

- Modification / interference with the housing of the device

- Modifications / changes inside the device

Write your opinion
Your opinion:
5/5
Add your own product photo:
IdoSell Trusted Reviews
4.91 / 5.00 303 reviews
IdoSell Trusted Reviews
2022-01-10
Wszystko przebiegło bardzo dobrze wielki pozytyw.
2022-01-10
Szybka sprawnie, i tanio.
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel