Save to shopping list
Create a new shopping list
BMS 4-16s LiPo / LiIon - 50A (symmetrical)
BMS 4-16s LiPo / LiIon - 50A (symmetrical)
BMS 4-16s LiPo / LiIon - 50A (symmetrical)
BMS 4-16s LiPo / LiIon - 50A (symmetrical)
On special offer

BMS 4-16s LiPo / LiIon - 50A (symmetrical)

  • Application: 4-16s battery, LiPo / LiIon
  • Maximum continuous discharge current: 50A
  • Maximum charging current: 25A
  • Balancing mode: above 4.22V, ending 4.16V
  • Minimum voltage per section: 2.65V
  • Balancing current: 30mA
  • Dimensions: 95 x 90 x 12mm
37,99 €(Discount 10%)
34,29 €
incl. VAT / pc
Express checkout 1-Click(without registration)
14 days for easy returns
Safe shopping
The lowest price before discount
Free delivery to parcel machinesMore information
Smile - deliveries from online stores when ordered from €10.27 are for free.
You buy and delivery is free!
deliveries from online stores are free when you order €10.27 are for free.
Free delivery includes parcel delivery to a parcel machine
Write your opinion
Your opinion:
5/5
Add your own product photo:

BMS 4-16s LiPo / LiIon - 50A (symmetrical)

Technical data:

  • Application: 4-16s battery, LiPo / LiIon
  • Maximum continuous discharge current: 50A
  • Maximum charging current: 25A
  • Balancing mode: above 4.22V, ending 4.16V
  • Minimum voltage per section: 2.65V
  • Balancing current: 30mA
  • Dimensions: 95 x 90 x 12mm
  • Cabling is included.


The BMS is SYMMETRIC - it means that the charge and discharge field is common and is used to solder the charger -C and -P cables of the controller

The BMS is UNIVERSAL, it works in installations in the 4-16 cell LiIon / LiPo range. If you have less than 16 sections - leave the end wires (on the plus side in the balancer plug) unconnected.

The BMS has a service module - each of the balancer channels has a signaling diode informing about the activation of the balancing load on each of the channels. This allows you to check the condition of the batteries, informs about the weakest sections and helps diagnose any problems.


An exemplary connection diagram depending on the number of sections you have

 


Connection description:
B- Connect the MINUS from the battery to this field

C- Connect the MINUS from the charger AND MINUS from the controller to this field

Balancing Connector:

BC0- (from the right) is the first cell from the battery MINUS

BC1 (from the right) is the first PLUS cell and the second MINUS

...

BC5 (right) is the 5th PLUS cell and the 6th MINUS

...

BC9- ninth PLUS cell

...

BXX- (Last marking with the largest number) - Last battery cell (i.e. FIRST from plus)

Notes and Tips
Note: For proper operation, BMS requires an appropriate charger compatible with the battery voltage. We recommend that the assembly of this device is performed by persons with knowledge of the subject.

Tip 1: We recommend the assembly of the BMS by people familiar with the subject of electronics / power. We suggest checking the correctness of connections 3x before the final start-up.

Tip 2: In an installation with a BMS, no miniature circuit breakers or soft starters are used. The BMS does not disconnect from the battery, it remains connected all the time ..

The most common problems when connecting a BMS are confused and incorrectly soldered connectors to the cells: always check the connections 5x before connecting everything to the BMS. Draw everything on a piece of paper. Use a meter / multimeter. If in doubt, contact our technical department and study the connection diagram and descriptions available on the web.

The correct sequence of connecting the BMS:
1. Connect the battery cable (MINUS) to the appropriate field in the BMS -B

2. Connect the cable from the controller (MINUS) to the appropriate -C field

3. Connect the cable from the charger (MINUS) to the appropriate -C field

4. Connect the PLUS cables of the controller, battery and charger (it may spark slightly - this is normal)

5. Finally, connect the balancer cables to the balancer connector (make sure they are soldered in the correct order beforehand)

6. After completing the installation, connect the charger for a while to activate and unlock the BMS at its first start-up.

You should avoid assembling the BMSs in a different order, it may end up damaging them.

IdoSell Trusted Reviews
4.92 / 5.00 663 reviews
IdoSell Trusted Reviews
2022-10-01
Przesyłka zaskakująco szybka. Profesjonalne zapkowanie oraz wysoka jakość produktów.
2022-10-01
Zakupy poprostu bajka , czas realizacji ekspres, jakoś produktów bardzo zadawalajaca. Kody rabatowe i dog9dne metody płatności
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixel